Tag: petroleum and natural gas

Quizzes (0) Questions (170)

Questions Related to petroleum and natural gas

Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

Crude oil is converted in to useful products by:

  1. drilling

  2. Solvay process

  3. roasting

  4. refining
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Crude oil in the raw form is obtained by drilling from the earth's crust. It has to be refined in order to convert it to useful products such as petrol, kerosene, diesel etc. The industrial plant where the refining of crude oil is done is called  an oil refinery. 

Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

Which of the following is not an important refinery process for upgrading the quality of lubrication oil?

  1. solvent refining

  2. deoiling

  3. clay treatment

  4. hydrotreatment
Reveal answer Fill a bubble to check yourself
B Correct answer
Explanation

In the refinery for lubricating oil, solvent refining, clay treatment and hydrotreatment are the important processes. The solvent used for refining purpose has to be pure. Clay treatment is done to remove colour, odour and sulphur from the oil. 

Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

Flash point of atmospheric distillation residue is determined by ______apparates.

  1. cleveland(open cup type)

  2. abel

  3. pensky-martens

  4. none of these
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

Cleveland is an open cup apparatus is also known as open cup tester. In this, the cup is first filled with the product to a certain level. Then the temperature is raised rapidly and then at a slow constant rate as it approaches the theoretical flashpoint. The lowest temperature at which a small test flame passing over the liquid ignites the vapour is considered chemical's flashpoint.


It is used for determining flashpoint of atmospheric distillation.

Hence, the correct option is $\text{A}$

Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

When earth's crust is drilled, hydrocarbon came out first is:

  1. petroleum

  2. methane

  3. ethane

  4. butane
Reveal answer Fill a bubble to check yourself
B Correct answer
Explanation

Hydrocarbon is a compound containing carbon atoms and hydrogen atoms. Methane is the hydrocarbon found in the earth's crust. It is the simplest hydrocarbon. It is mainly used as fuel.

Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

Major source of propylene in a refinery is:

  1. visbreaking

  2. iso cracking process

  3. fluidised bed catalytic cracking

  4. catalytic reforming
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Propylene is often referred to as the crown prince of petrochemicals. Propylene is a byproduct of steam crackers and the varying amount of olefins is produced from steam crackers depending on the type of feedstock. Other sources of propylene may be the recovery of propylene from FCC light ends, Propane dehydrogenation and fluidized bed catalytic cracking.

Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

As per the EuroIII norms for gasoline the benzene content should be:

  1. 1%

  2. 2%

  3. 3%

  4. 4%
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

Bharat stage emission standard is an emission standard institute which is governed by the government of India to regulate the air pollutants from internal combustion engines or vehicle motors.Bharat Stage III norms or Euro III norms were enforced in October 2010 all over the country. According to this benzene content in gasoline should be 1%.

Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

Which of the following is true from given statements?

  1. use of steam reduces the selectivity towards higher olefin production

  2. increase tube diameter increases the yield of propylene

  3. use of steam increases the selectivity towards higher olefin production

  4. increase tube diameter increases the yield of ethyne
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation
Use of steam increases the selectively towards higher olefin production.
The two most common petrochemical classes are olefins (including ethylene and propylene) and aromatics (including benzene, toluene and xylene isomers). Oil refineries produce olefins and aromatics by fluid catalytic cracking of petroleum fractions. Chemical plants produce olefins by steam cracking of natural gas liquids like ethane and propane. Aromatics are produced by catalytic reforming of naphtha. Olefins and aromatics are the building blocks for a wide range of materials such as solvents, detergents, and adhesives. Olefins are the basis for polymers and oligomers used in plastics, resins, fibres, elastomers, lubricants, and gels.
Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

Which of the following statements is true if fuel has high aniline point?

  1. Fuel has low paraffin

  2. Fuel has high diesel index

  3. Fuel has high aromatics

  4. Fuel has low diesel index
Reveal answer Fill a bubble to check yourself
B Correct answer
Explanation

Aniline point is the lowest temperature at which equal volumes of fresh aniline and an oil are completely miscible. Higher the aniline point, higher is the diesel index. Diesel index indicates the ignition quality of the fuel. 

Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

Steam consumption in steam cracker plant is high in case of:

  1. gas oil

  2. propane

  3. napthalene

  4. ethane
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

In petroleum chemistry, Steam cracker plant is a process by which complex organic molecules are broken down to the simpler molecules using steam. Here, the cracking is done by using steam. Ethane cracking consumes the maximum amount of steam.

Multiple choice chemistry energy rocks and minerals petroleum and natural gas fossil fuels

In a case of catalytic reforming dehydration of naphthenes to aromatics is:

  1. favoured by a decrease in temperature and decrease in pressure

  2. favoured by an increase in temperature and increase in pressure

  3. favoured by an increase in temperature and decrease in pressure

  4. none of these
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

In catalytic reforming process, high octane number reformate is formed which is the main component of the motor, fuel, aviation gasoline or aromatic rich feedstock. Favourable Conditions for the reaction are High temperature, Low pressure and low space velocity.