For the circuit shown in figure below, two 4-bit parallel-in serial-out shift registers loaded with the data shown are used to feed the data to a full-adder. Initially, all the flip-flops are in clear state. After applying two clock pulses, what will be the outputs of the full-adder?

Keep practicing — related questions

• In the circuit shown in Figure, A is a parallel in, parallel-out 4-bit register, which loads at the rising ...
• Consider the circuit in the diagram. The $\oplus$ operator represents Ex - OR. The D flip - flops are initi...
• In which circuit, all the flip-flops are simultaneously triggered from the same clock input?
• Consider the partial implementation fo a 2-bit counter using T flip flops following the sequence 0-2-3-1-0,...
• Consider the partial implementation of a 2 - bit counter using T flip flops following the sequence 0 - 2- 3...
• Two D-flip-flops, as shown below, are to be connected as a synchronous counter that goes through the follow...
• The outputs of the two flip-flops Q1, Q2 in the figure shown are initialized to 0, 0. The sequence generate...
• The circuit shown below consists of JK flip-flops, each with an active low asynchronous reset ($\bar{R}_d$ ...