Consider the following multiplexor where 10, 11, 12, 13 are four data input lines selected by two address line combinations A1A0 = 00,01,10,11 respectively and f is the output of the multiplexor. EN is the Enable input.

The function f (x,y,z) implemented by the above circuit is

Keep practicing — related questions

• A gate having two inputs (A and B) and one output (Y) is implemented using a 4-to-1 multiplexer as shown in...
• Consider a multiplexer with X and Y as data inputs and Z as control input's = 0 selects input X, and Z = 1 ...
• For the circuit shown in the following, I0 - I3 are inputs to the 4 : 1 multiplexers, R (MSB) and S are con...
• Consider the circuit shown below. The output of a 2:1 Mux is given by the function (ac' + bc). ![](https://...
• A multiplexer with a 4-bit data select input is a
• The Boolean function f implemented in figure using two input multiplexers is ![](https://i.imgur.com/PP0ofT...
• The vapour pressure of two miscible liquids $(A)$ and $(B)$ are $300$ and $500\:mm$ of $Hg$ respectively. I...
• Two cylindrical poles with diameters 8 and 10 metres and having centres of base separated by 20 metres are ...