Tag: network basics2

Questions Related to network basics2

Your client has a 10Base2 Ehternet network which is using 160m of RG-58A/U cable and two 50 ohm terminators that are both grounded.What is wrong with his network?
network basics2

  1. The terminators should be 93 ohms

  2. He should be using RG-59/U cable

  3. Only one terminator should be grounded

  4. Impedence mismatch

Show answer
Correct Option: C

Of the following the one that is NOT an alogorithm that determines the shortest path for routers?
network basics2

  1. SAP

  2. RIP

  3. OSPF

  4. EIGRP

Show answer
Correct Option: A

The most common topology in use today among corporate users?
network basics2

  1. Bus

  2. Ring

  3. Star-bus

  4. Mesh

Show answer
Correct Option: C

___ uses a 93 ohm resistor?
network basics2

  1. RG62

  2. RG58

  3. RG59

  4. RJ45

Show answer
Correct Option: A

Device drivers can be disabled in Win 2000 Prof in Device Manager or by using the ___?
network basics2

  1. ERD

  2. Recovery Console

  3. RDISK

  4. Disk Management Console

Show answer
Correct Option: B

OSI level responsible for compression and encryption of data?
network basics2

  1. Session

  2. Application

  3. Presentation

  4. Transport

Show answer
Correct Option: C

Smart Cards in Win 2000 use the ___ RAS authentication protocol for security?
network basics2

  1. PAP

  2. MSCHAP

  3. EAP

  4. CHAP

Show answer
Correct Option: C

Which architecture is recommended under high network utilization of up to 70% or 80%?
network basics2

  1. Ethernet bus

  2. Token Ring

  3. DLC

  4. FDDI

Show answer
Correct Option: B

The following protocols are supported by RAS?

network basics2

  1. TCP/IP

  2. NetBEUI

  3. All of the above

  4. None of the above

Show answer
Correct Option: C

A token-ring network has a maximum limit of ___ computers?

network basics2

  1. 1024

  2. 260

  3. 512

  4. 2024

Show answer
Correct Option: B