Tag: introduction to electrostatics

Metals are good conductors of electricity while non metals are bad conductivity as metal has lot of free electrons and therefore conducts while non metal  does not have any free electron and does not conduct electricity.So the answer is false.

Out of eraser, paper, copper wire, and polythene, only copper wire is the conductor which is used in the conduction and are used in many practical application circuit.

A jute string cannot be used to make a circuit as jute is an insulator and does not conduct electricity while metal is a conductor of electricity, hence, metal wires can be used to make a circuit.

Glass wool is an insulating material made from fibres of glass arranged using a binder into a texture similar to wool. The process traps many small pockets of air between the glass, and these small air pockets result in the thermal insulation properties.
Glass wool is produced in rolls or in slabs, with different thermal and mechanical properties. It may also be produced as a material that can be sprayed or applied in place, on the surface to be insulated.
They possess very low expansion property, remarkable thermal shock resistance, low thermal conductivity, excellent electrical insulation up to 1000 C, and excellent resistance to corrosion from molten metal. 
Hence, Glass wool is a poor conductor of electricity.

The electrical conductivity of matter is dependent upon the atomic structure of the material from which the conductor is made. In any solid material, such as copper, the atoms which make up the molecular structure are bound firmly together. At room temperature, copper will contain a considerable amount of heat energy. Since heat energy is one method of removing electrons from their orbits, copper will contain many free electrons that can move from atom to atom. When not under the influence of an external force, these electrons move in a zigzag manner within the conductor. This movement is equal in all directions so that electrons are not lost or gained by any part of the conductor. When controlled by an external force, the electrons move generally in the same direction. The effect of this movement is felt almost instantly from one end of the conductor to the other. This electron movement is called an ELECTRIC CURRENT.
Some metals are better conductors of electricity than others. Silver, copper, gold, and aluminum are materials with many free electrons and make good conductors. Silver is the best conductor, followed by copper, gold, and aluminum. Copper is used more often than silver because of cost. Aluminum is used where weight is a major consideration, such as in high-tension power lines, with long spans between supports. Gold is used where oxidation or corrosion is a consideration and a good conductivity is required.
Hence, Aluminium is a good conductor of electricity.

The electrical and thermal conduction properties of a material can be similar or very different, in metals the electrical and thermal conductivity is due to free electrons, in non-metals thermal conductivity has nothing to do with free electrons, but more to do with lattice vibrations (that is, phonons). 
So mica has good thermal conductivity due to phonons, but doesn't have sufficient free electrons and a very high resistance to be a good conductor of electricity.
Hence, Mica is a poor or bad conductor of electricity.

Plastic is a good insulator of electricity and makes it possible to work with wires without any harm or injury.

Metals are good conductors of electricity.
Silver is a metal and a good conductor of electricity.

Metals are generally good conductors of electricity. So, Gold and Aluminium are good conductors of electricity. 
Non-metals are poor conductors of electricity.
So rubber, being a non-metal, is an electrical insulator and hence a poor conductor of electricity.

For bulb to glow there should be current passing through it's entire circuit. But when probs are hanged in the air the circuit breaks as air do not conduct electricity (or bad conductor of electricity).