General Awareness ยท Environmental Studies

Occupational Health and Safety

2,242 Questions

Occupational health and safety involve identifying workplace hazards, implementing protective equipment, and establishing administrative controls to prevent accidents. These questions cover mitigation measures, risk reduction, and safety best practices. This material is useful for RRB, SSC, and state-level technical or general awareness exams.

Workplace hazard controlsPersonal protective equipmentFire and ship safetyDisaster risk reductionAccident prevention

Occupational Health and Safety Questions

Multiple choice

When should PPE be used?

  1. Only when there is a risk of injury.

  2. Only when required by law.

  3. Whenever there is a potential hazard in the workplace.

  4. Only when working with hazardous chemicals.
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

PPE should be used whenever there is a potential hazard in the workplace, regardless of the likelihood of injury.

Multiple choice

What type of PPE is used to protect the eyes from hazards?

  1. Safety glasses

  2. Goggles

  3. Face shields

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Safety glasses, goggles, and face shields are all types of PPE used to protect the eyes from hazards such as flying debris, chemicals, and radiation.

Multiple choice

What type of PPE is used to protect the respiratory system from hazardous substances?

  1. Respirators

  2. Dust masks

  3. Surgical masks

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Respirators, dust masks, and surgical masks are all types of PPE used to protect the respiratory system from hazardous substances such as dust, fumes, and gases.

Multiple choice

What type of PPE is used to protect the hands from hazards?

  1. Gloves

  2. Sleeves

  3. Hand guards

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Gloves, sleeves, and hand guards are all types of PPE used to protect the hands from hazards such as chemicals, heat, and sharp objects.

Multiple choice

What is the importance of proper fit and maintenance of PPE?

  1. To ensure maximum protection

  2. To prevent discomfort and injury

  3. To comply with regulations

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Proper fit and maintenance of PPE are essential to ensure maximum protection, prevent discomfort and injury, and comply with regulations.

Multiple choice

Who is responsible for training workers on the proper use and maintenance of PPE?

  1. The employer

  2. The employee

  3. The manufacturer of the PPE

  4. All of the above
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

The employer is responsible for training workers on the proper use and maintenance of PPE.

Multiple choice

What is the importance of regular inspections of PPE?

  1. To identify and replace damaged or defective PPE

  2. To ensure that PPE is being used properly

  3. To comply with regulations

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Regular inspections of PPE are important to identify and replace damaged or defective PPE, ensure that PPE is being used properly, and comply with regulations.

Multiple choice

What is the primary objective of robot safety?

  1. To prevent robot-human collisions

  2. To minimize robot damage

  3. To ensure robot reliability

  4. To comply with regulatory standards
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

Robot safety is primarily concerned with preventing robot-human collisions and ensuring the safety of human operators and bystanders in the robot's workspace.

Multiple choice

Which safety standard is commonly used for industrial robots?

  1. ISO 10218

  2. ANSI/RIA R15.06

  3. IEC 60204-1

  4. OSHA 29 CFR 1910.253
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

ISO 10218 is a widely recognized international standard for industrial robot safety, providing guidelines for robot design, installation, and operation to minimize the risk of accidents.

Multiple choice

Which of these is a common safety precaution to take while bodyboarding?

  1. Wearing a helmet

  2. Using a leash

  3. Avoiding crowded areas

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

For safety, bodyboarders should wear a helmet to protect their head, use a leash to keep the board attached to their body, and avoid crowded areas to minimize the risk of collisions.

Multiple choice

Which of the following is NOT a strategy for reducing lead (Pb) exposure in communities?

  1. Eliminating lead-based paint hazards

  2. Reducing lead levels in soil

  3. Providing access to clean water sources

  4. Increasing the use of lead-based gasoline
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Eliminating lead-based paint hazards, reducing lead levels in soil, and providing access to clean water sources are all strategies for reducing lead exposure in communities. Increasing the use of lead-based gasoline, on the other hand, would increase lead emissions and exposure.

Multiple choice

Which of the following is NOT a strategy for reducing lead (Pb) exposure in the workplace?

  1. Using lead-free materials and substitutes

  2. Providing adequate ventilation and respiratory protection

  3. Regularly monitoring lead levels in the workplace

  4. Increasing the use of lead-based products
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Using lead-free materials and substitutes, providing adequate ventilation and respiratory protection, and regularly monitoring lead levels in the workplace are all strategies for reducing lead exposure in the workplace. Increasing the use of lead-based products, on the other hand, would increase lead exposure.

Multiple choice

What is the best way to prevent workers' compensation fraud?

  1. Education

  2. Detection

  3. Deterrence

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

The best way to prevent workers' compensation fraud is through a combination of education, detection, and deterrence.

Multiple choice

Which of the following is NOT a common method for controlling air pollution from construction activities?

  1. Using low-emission construction equipment

  2. Implementing dust control measures

  3. Properly disposing of hazardous materials

  4. Planting trees and vegetation
Reveal answer Fill a bubble to check yourself
Correct answer
Explanation

Planting trees and vegetation is not a direct method for controlling air pollution from construction activities. While vegetation can contribute to air quality improvement in general, it is not a primary strategy for managing construction-related air pollution.

Multiple choice

Which of the following is NOT a key element of extreme sports safety?

  1. Proper training and instruction

  2. Ignoring safety guidelines

  3. Using appropriate safety gear

  4. Assessing and mitigating risks
Reveal answer Fill a bubble to check yourself
B Correct answer
Explanation

Extreme sports safety involves adhering to safety guidelines, not disregarding them.