General Awareness ยท Environmental Studies

Occupational Health and Safety

1,986 Questions

Occupational health and safety involve identifying workplace hazards, implementing protective equipment, and establishing administrative controls to prevent accidents. These questions cover mitigation measures, risk reduction, and safety best practices. This material is useful for RRB, SSC, and state-level technical or general awareness exams.

Workplace hazard controlsPersonal protective equipmentFire and ship safetyDisaster risk reductionAccident prevention

Occupational Health and Safety Questions

Multiple choice

Which of the following is NOT a common safety precaution to take when metal brazing?

  1. Wearing protective clothing

  2. Using proper ventilation

  3. Storing flammable materials away from the work area

  4. Touching the brazed joint immediately after brazing
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Touching the brazed joint immediately after brazing can cause burns due to the high temperatures involved. It is important to allow the joint to cool down before handling it.

Multiple choice

What is the most important safety measure to follow when snorkeling?

  1. Wear a life jacket

  2. Stay close to the shore

  3. Never snorkel alone

  4. Use a snorkel with a purge valve
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

The most important safety measure to follow when snorkeling is to never snorkel alone. Snorkeling with a buddy allows you to keep an eye on each other and provide assistance if needed.

Multiple choice

What are some of the best practices for preventing domestic violence?

  1. Educating the public about domestic violence.

  2. Providing support and resources to victims.

  3. Holding abusers accountable.

  4. All of the above.
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Preventing domestic violence requires a comprehensive approach that includes educating the public, providing support and resources to victims, and holding abusers accountable.

Multiple choice

Which of the following is NOT a key component of an effective Risk Management framework?

  1. Risk Identification

  2. Risk Assessment

  3. Risk Mitigation

  4. Risk Avoidance
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Risk Avoidance is not a key component of Risk Management. Instead, organizations focus on identifying, assessing, and mitigating risks to minimize their impact.

Multiple choice

Which ILO convention addresses the issue of occupational safety and health?

  1. Convention 155 on Occupational Safety and Health

  2. Convention 161 on Occupational Health Services

  3. Convention 170 on Chemicals at Work

  4. Convention 187 on Promotional Framework for Occupational Safety and Health
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

Convention 155 on Occupational Safety and Health addresses the issue of occupational safety and health.

Multiple choice

What is the most important safety precaution to take when working with sharp tools?

  1. Wear safety goggles

  2. Use a sharpener to keep tools sharp

  3. Keep tools away from children

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

When working with sharp tools, it is important to take all necessary safety precautions to avoid injury. This includes wearing safety goggles to protect your eyes, using a sharpener to keep tools sharp, and keeping tools away from children.

Multiple choice

What is the best way to prevent accidents when working with power tools?

  1. Read the instructions for the tool before using it

  2. Wear safety goggles and gloves

  3. Keep the work area clean and free of debris

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

To prevent accidents when working with power tools, it is important to read the instructions for the tool before using it, wear safety goggles and gloves, and keep the work area clean and free of debris.

Multiple choice

What should you do if you have a question about the safety of a craft project?

  1. Consult the instructions for the project

  2. Ask a knowledgeable friend or family member

  3. Contact the manufacturer of the materials

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

If you have a question about the safety of a craft project, it is important to consult the instructions for the project, ask a knowledgeable friend or family member, and contact the manufacturer of the materials.

Multiple choice

What should you do if you have a question about the safety of a chemical used in a craft project?

  1. Consult the Material Safety Data Sheet (MSDS) for the chemical

  2. Ask a knowledgeable friend or family member

  3. Contact the manufacturer of the chemical

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

If you have a question about the safety of a chemical used in a craft project, it is important to consult the Material Safety Data Sheet (MSDS) for the chemical, ask a knowledgeable friend or family member, and contact the manufacturer of the chemical.

Multiple choice

What is the best way to prevent accidents when working with power tools?

  1. Read the instructions for the tool before using it

  2. Wear safety goggles and gloves

  3. Keep the work area clean and free of debris

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

To prevent accidents when working with power tools, it is important to read the instructions for the tool before using it, wear safety goggles and gloves, and keep the work area clean and free of debris.

Multiple choice

What are some of the safety precautions that should be taken when working with patination chemicals?

  1. Wear gloves and eye protection

  2. Work in a well-ventilated area

  3. Avoid contact with skin and eyes

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

When working with patination chemicals, it is important to wear gloves and eye protection, work in a well-ventilated area, and avoid contact with skin and eyes.

Multiple choice

What safety precautions should be taken when working with Gelli printing materials?

  1. Wear gloves and a mask when handling chemicals

  2. Work in a well-ventilated area

  3. Clean up spills immediately

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

When working with Gelli printing materials, it is important to wear gloves and a mask when handling chemicals, work in a well-ventilated area, and clean up spills immediately to ensure safety.

Multiple choice

Voice assistants in manufacturing can help improve worker safety by:

  1. Reducing the need for manual intervention in hazardous tasks

  2. Providing real-time alerts and warnings

  3. Enabling remote monitoring and control of machinery

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Voice assistants enhance worker safety by reducing manual intervention in hazardous tasks, providing real-time alerts, and enabling remote monitoring and control of machinery.

Multiple choice

How do voice assistants contribute to enhanced safety in construction?

  1. By providing real-time hazard alerts

  2. By enabling hands-free communication

  3. By reducing the need for physical interaction with tools

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Voice assistants offer multiple safety benefits in construction, including real-time hazard alerts, hands-free communication, and reduced physical interaction with tools.

Multiple choice

How can game engine developers ensure the safety and well-being of players?

  1. Implementing anti-bullying and harassment features

  2. Providing resources and support for players experiencing mental health issues or addiction

  3. Creating games that promote healthy behaviors and lifestyles

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Game engine developers can ensure player safety and well-being by implementing anti-bullying features, providing support resources, and creating games that promote positive behaviors.