In an interchangeable assembly, shafts of size 25 mm having range [0.04 to - 0.010] are mated with holes of size 25 mm having range [0.030 to - 0.020]. The maximum interference (in microns) in the assembly is

Keep practicing — related questions

• The limits of holes are 25.000 and 25.021 and that of a shafts are 25.022 and 25.035. The type of fit is
• Holes of diameter 25.0$+0.040\\\\ +0.020$mm are assembled interchangeably with the pins of diameter 25.0$+0...
• A hole is dimension $\phi$$9 ^{\begin{matrix} \ +0.015 \\ \ +0 \\ \end{matrix}}$mm. The corresponding shaf...
• In order to have interference fit, it is essential that the lower limit of the shaft should be
• Match the following: | P. Bevel gears | 1. Non-parallel intersecting shafts| |---|---| | Q. Worm gears | 2....
• If a hole in a disc is 10 mm +0.050 and -0.020 what should be the shaft dimension which will have minimum c...
• The two shafts AB and BC, of equal length and diameters d and 2d, are made of the same material. They are j...
• Which of the following fields in Link Access Procedure (LAP) frame format is a variable size field with a m...