The limits of holes are 25.000 and 25.021 and that of a shafts are 25.022 and 25.035. The type of fit is
Reveal answer
Fill a bubble to check yourself
Keep practicing — related questions
- In order to have interference fit, it is essential that the lower limit of the shaft should be
- In an interchangeable assembly, shafts of size 25 mm having range [0.04 to - 0.010] are mated with holes of...
- A hole is dimension $\phi$$9 ^{\begin{matrix} \ +0.015 \\ \ +0 \\ \end{matrix}}$mm. The corresponding shaf...
- Holes of diameter 25.0$+0.040\\\\ +0.020$mm are assembled interchangeably with the pins of diameter 25.0$+0...
- If a hole in a disc is 10 mm +0.050 and -0.020 what should be the shaft dimension which will have minimum c...
- Match the following: | P. Bevel gears | 1. Non-parallel intersecting shafts| |---|---| | Q. Worm gears | 2....
- No tall building is allowed within ______ from the aiport according to the aircraft rules 1937.
- The book value of furniture at the beginning of an year on 1st April was Rs. 1,50,000. During the year, fur...