The control signal functions of a 4-bit binary counter are given below (where X is “don't care”): Clear Clock Load Count Function

The counter is connected as follows:

Assume that the counter and gate delays are negligible. If the counter starts at 0, then it cycles through the following sequence:

Keep practicing — related questions

• The count of four bit down counter is 0000. When a clock pulse is applied, its count will be
• Which of the following is called a one bit asynchronous counter sequential circuit?
• A 4 bit ripple counter and a 4 bit synchronous counter are made using flip-flops having a propagation delay...
• If the worst case propagation delay in a 4 bit synchronous counter is 10 msec, which will give correct dela...
• The circuit shown below consists of JK flip-flops, each with an active low asynchronous reset ($\bar{R}_d$ ...
• In the figure given below, U1 is a 4-bit synchronous centre with synchronous clear. Q0 is the LSB and Q3 is...
• Consider a 4-bit ripple counter and a 4-bit synchronous counter made using flip-flops. Propagation delay = ...
• Directions: Carry Two Marks Each. The figure shows a binary counter with synchronous clear input. With the ...