Tag: physics

The fuse must always be connected to the mains and it must be of correct value. For example, a 15-ampere fuse should trip when the current through it exceeds 15 amperes. A 20-ampere fuse should blow when the current through it exceeds 20 amps.
As we know, the cross-sectional area of the wires will affect the amount of resistance. Wider wires have a greater cross-sectional area. Water will flow through a wider pipe at a higher rate than it will flow through a narrow pipe. This can be attributed to the lower amount of resistance that is present in the wider pipe. In the same manner, the wider the wire, the less resistance that there will be to the flow of electric charge. When all other variables are the same, charge will flow at higher rates that is, more current through wider wires with greater cross-sectional areas than through thinner wires.
Hence, the 20 A wire is the thicker wire as more amount of current flow through it than the 5 A wire.

The electrical resistance of an electrical conductor is the opposition to the passage of an electric current through that conductor. The SI unit of electrical resistance is the ohm $\Omega $.
When the opposition to the passage of an electric current through that conductor is more it is called high resistance and when the opposition to the passage of an electric current through that conductor is less it is called low resistance.
The amount of resistance determines whether the circuit is a good conductor low resistance, or a bad conductor high resistance. 

Fuses are safety devices that are to be built into our electrical system. If there were no fuses and we operated too many appliances on a single circuit, the cable carrying the power for that circuit would get extremely hot, short circuit, and possibly start a fire. To prevent electrical overloads, fuses are designed to trip or blow, stopping the flow of current to the overloaded cable.
Fuse is a piece of wire of a material with a very low melting point. When a high current flows through the circuit due to overloading or short circuit, the wires gets heated and melts. As a result, the circuit is broken and current stops flowing. 
Hence, the statement is true as the material used for fuse has low melting point.

Fuse is a piece of wire of a material with a very low melting point. When a high current flows through the circuit due to overloading or short circuit, the wires gets heated and melts. As a result, the circuit is broken and current stops flowing. 
The fuse must always be connected to the mains and it must be of correct value. For example, a 15-ampere fuse should trip when the current through it exceeds 15 amperes. A 20-ampere fuse should blow when the current through it exceeds 20 amps.
In this case, the electrical appliance is of 1100 W power and 220 V. So the current that passes through the appliance is calculated from P=VI. That is, I=P/V.
So, I = 1100 W/220 V = 5 A.
Hence, the wire B with current rating of 6 A should be used for the fuse.

Switches, fuses and circuit breakers must be placed in the live wire, not in neutral wire. And all the other statements given are correct.

The commonly used fuse wire is made of an alloy of tin and lead.

A fuse is a piece of wire resistance which acts in a way such that if the voltage in a circuit exceeds the rating of the fuse then the fuse wire melts and the circuit becomes an open circuit, thereby breaking the circuit and preventing the components from getting damaged due to short circuit. Now, if two fuses are in series, the melting of a single fuse can break the circuit and so in series the rating will be 10A. However, in parallel, even if one fuse is melted, the other fuse still works and so the net rating will be 20A.

Usually, there are two separate circuits in a house, the lighting circuit with a 5A fuse and the house circuit with a 15A fuse.

• This means much amount of current will be drawn from the socket.
• If we plug in a washing machine,a hair dryer ,a 1 HP mixer grinder then out socket will simply melt.
• So by using multi-plugs adapter current drawn increase result in over heating.

When by short-circuit or any other reason current exceed its nominal value that time fuse breaks the circuit and so cuts off the high voltage from the appliance which prevent it from damage.