Tag: elastic behaviour of solids

Two prominent mechanisms of plastic deformation, namely slip and twinning occur . 
1. Slip involves sliding of blocks of crystal over one other along definite crystallographic planes, called slip planes. During slip each atom usually moves same integral number of atomic distances along the slip plane producing a step, but the orientation of the crystal remains the same.

2. Portion of crystal takes up an orientation that is related to the orientation of the rest of the untwined lattice in a definite, symmetrical way. The twinned portion of the crystal is a mirror image of the parent crystal.

Substances that break just after elastic limit is reached are known as brittle substances

The yield point is the point on a stressstrain curve that indicates the limit of elastic behavior and the beginning of plastic behavior. Yielding means the start of breaking of fibers.

The correct option is option(a)

Plasticity is defined as the property which enables a material to be deformed continuously and permanently without rupture during the application of force. This deformation determines the viscous behavior of the material and is irrecoverable.

Beyond the elastic limit, permanent deformation will occur. The elastic limit is therefore the lowest stress point at which permanent deformation can be measured. At yield point, permanent deformation occurs or the substance becomes plastic.

The correct option is option (b)

The yield point is the point on a stressstrain curve that indicates the limit of elastic behavior and the beginning of plastic behavior. Yielding means the start of breaking of fibers.

Thus, Hooke's law dosent hold good in this region, as stress is not proportional to strain in this region

A perfectly plastic body is one that undergoes permanent deformation under stress and does not recover its original shape when the deforming force is removed. Plasticine is a non-drying clay that exhibits near-perfect plasticity.

An elastic rod changes its length when subjected to a tensile force (being pulled). Falling vertically under its own weight also causes stress and potential elongation, but pulling is the standard demonstration of elastic deformation.

When a material is stressed beyond its elastic limit, it does not return to its initial dimensions upon unloading, retaining a permanent strain or deformation known as a set.

Modulus of elasticity gives the idea of elasticity. For above materials, values of E are:
Glass: $50-90 GPa$
Rubber:$ 0.01-0.1 GPa$
Steel:$ 200 GPa$
Copper: $117 GPa$