Tag: the magnetic effect of a current

The bell works on the principle of electromagnetism which says that when an electric current flows through the coil, the rods become magnetic and attract a piece of iron attached to a clapper. And the clapper hits the cap and comes back as the current stops, and hence the bell rings. So the current flows and stops in succession. And in this way the bell rings.

Make and break arrangement causes striker to repeatedly hit the metal gong as long as switch is pressed. When Circuit is complete, electromagnet attracts the striker which hits metal gong. As soon as the striker moves, circuit breaks and electromagnet is inactive. Because of flexibility of striker, it moves back to its original position. As soon as it reaches original position, circuit is complete. This process repeats continuously. 

Because of lack of flexibility, striker will resist change of motion more and may break if current is large.

Without the flexibility strip, the striker will not come back to original position when the electrical circuit breaks.

When switch is pressed, circuit completes and ringing begins. Hence, electrical energy is converted to sound energy. As switch is released, no current flows and no energy is consumed,

Mechanical Damage to metal gong or striker may hinder working of the bell.

Striker repeatedly hits the metal gong when doorbell is ringing. 

The working of an electric magnet is based on the magnetic effect of current. When the key is pressed the circuit gets completed and current passes through it causing the electromagnet to get magnetized which in turn attracts the armature. This movement of the armature causes the hammer to strike the gong. However when the armature moves towards the gong the connection between the spring strip and adjusting screw is lost which breaks the circuit and the current flow is stopped thus demagnetizing the electromagnet. This causes the armature to return to its original position and it is thus pulled back due to the spring effect of the spring strip. This process is called a make and break circuit.

The working of an electric magnet is based on the magnetic effect of current. When the key is pressed the circuit gets completed and current passes through it causing the electromagnet to get magnetized which in turn attracts the armature. This movement of the armature causes the hammer to strike the gong. However when the armature moves towards the gong the connection between the spring strip and adjusting screw is lost which breaks the circuit and the current flow is stopped thus demagnetizing the electromagnet. This causes the armature to return to its original position and it is thus pulled back due to the spring effect of the spring strip. This process is called a make and break circuit.

The working of an electric magnet is based on the magnetic effect of current. When the key is pressed the circuit gets completed and current passes through it causing the electromagnet to get magnetized which in turn attracts the armature. This movement of the armature causes the hammer to strike the gong.