General Awareness ยท Environmental Studies

Occupational Health and Safety

2,242 Questions

Occupational health and safety involve identifying workplace hazards, implementing protective equipment, and establishing administrative controls to prevent accidents. These questions cover mitigation measures, risk reduction, and safety best practices. This material is useful for RRB, SSC, and state-level technical or general awareness exams.

Workplace hazard controlsPersonal protective equipmentFire and ship safetyDisaster risk reductionAccident prevention

Occupational Health and Safety Questions

Multiple choice

What are some of the things that models can do to protect themselves in the modeling industry?

  1. Getting a good agent

  2. Reading contracts carefully

  3. Being aware of their rights

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Models can protect themselves in the modeling industry by getting a good agent, reading contracts carefully, being aware of their rights, and speaking up if they feel they are being mistreated.

Multiple choice

Which of the following is a common safety protocol for working on hydropower systems?

  1. Wearing appropriate personal protective equipment (PPE)

  2. Following lockout/tagout procedures

  3. Maintaining a safe working environment

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

When working on hydropower systems, it is essential to adhere to safety protocols, including wearing PPE, following lockout/tagout procedures, and maintaining a safe working environment.

Multiple choice

Which framework is designed to help organizations manage cybersecurity risks in the energy sector?

  1. ISO 27001

  2. NIST Cybersecurity Framework

  3. COBIT

  4. North American Electric Reliability Corporation (NERC) Critical Infrastructure Protection (CIP) Standards
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

The NERC CIP Standards are a set of regulations that electric utilities must follow to protect the reliability and security of the bulk electric system.

Multiple choice

Which of the following is NOT a common method for preventing ceramic defects?

  1. Proper material selection

  2. Careful processing and manufacturing techniques

  3. Quality control and inspection

  4. Post-processing treatments
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Post-processing treatments are typically not used to prevent ceramic defects, but rather to improve the properties or performance of the ceramic.

Multiple choice

Which of the following is NOT a step in disaster preparedness?

  1. Developing a disaster plan

  2. Building an emergency kit

  3. Staying informed about potential hazards

  4. Ignoring warnings and evacuation orders
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Ignoring warnings and evacuation orders is not a step in disaster preparedness. It is important to follow the instructions of local authorities and evacuate to a safe location if necessary.

Multiple choice

Which of the following is a common type of preventive maintenance task in pharmaceutical manufacturing?

  1. Cleaning and lubrication of equipment

  2. Replacement of worn parts

  3. Calibration of measuring instruments

  4. Validation of manufacturing processes
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

Cleaning and lubrication of equipment is a common type of preventive maintenance task in pharmaceutical manufacturing. It helps to prevent wear and tear, reduce the risk of breakdowns, and ensure optimal performance of the equipment.

Multiple choice

What is the Rotterdam Convention's motto?

  1. Protecting human health and the environment from hazardous chemicals and pesticides.

  2. Promoting the safe and environmentally sound use of hazardous chemicals and pesticides.

  3. Reducing the risk of accidents involving hazardous chemicals and pesticides.

  4. Facilitating the exchange of information on hazardous chemicals and pesticides.

  5. Promoting the development of safer alternatives to hazardous chemicals and pesticides.
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

The Rotterdam Convention's motto is 'Protecting human health and the environment from hazardous chemicals and pesticides'.

Multiple choice

What are the safety considerations that need to be taken into account when using robots in pharmaceutical manufacturing?

  1. Proper training of operators

  2. Regular maintenance and inspection of robots

  3. Use of safety guards and barriers

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

When using robots in pharmaceutical manufacturing, it is important to take into account safety considerations such as proper training of operators, regular maintenance and inspection of robots, and use of safety guards and barriers.

Multiple choice

What are the safety considerations that need to be taken into account when using robots in pharmaceutical manufacturing?

  1. Proper training of operators

  2. Regular maintenance and inspection of robots

  3. Use of safety guards and barriers

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

When using robots in pharmaceutical manufacturing, it is important to take into account safety considerations such as proper training of operators, regular maintenance and inspection of robots, and use of safety guards and barriers.

Multiple choice

Which industry utilizes robots to automate repetitive and hazardous tasks in hazardous environments?

  1. Manufacturing

  2. Mining

  3. Retail

  4. Education
Reveal answer Fill a bubble to check yourself
B Correct answer
Explanation

Robots are extensively used in mining operations to perform dangerous and repetitive tasks in hazardous environments, ensuring worker safety.

Multiple choice

In what field are robots employed to assist firefighters in extinguishing fires and rescuing people from burning buildings?

  1. Manufacturing

  2. Transportation

  3. Public Safety

  4. Education
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Robots play a crucial role in public safety, assisting firefighters in extinguishing fires and rescuing people from dangerous situations.

Multiple choice

Which of the following is NOT a common method of fire management?

  1. Prescribed burning

  2. Fire suppression

  3. Fuel management

  4. Mechanical thinning
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Mechanical thinning is not a common method of fire management, as it is typically used to improve forest health and productivity.

Multiple choice

How can AI contribute to improving safety in manufacturing environments?

  1. By identifying potential hazards

  2. By monitoring worker activities

  3. By providing real-time alerts

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

AI can contribute to improving safety in manufacturing environments by identifying potential hazards, monitoring worker activities for unsafe practices, and providing real-time alerts to prevent accidents and injuries.

Multiple choice

Which of the following activities is prohibited in the CRZ-I (High Hazard Zone)?

  1. Agriculture and allied activities

  2. Construction of roads and bridges

  3. Mining and quarrying

  4. Setting up of industries
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Mining and quarrying are prohibited in the CRZ-I (High Hazard Zone) due to their potential to cause significant environmental damage and ecological disruption.

Multiple choice

Which of the following is not a permissible activity in the CRZ-III (Low Hazard Zone)?

  1. Construction of residential buildings

  2. Development of tourism infrastructure

  3. Setting up of industries

  4. Agriculture and allied activities
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Setting up of industries is not a permissible activity in the CRZ-III (Low Hazard Zone) due to the potential for industrial pollution and environmental degradation.