General Awareness ยท Environmental Studies

Occupational Health and Safety

2,242 Questions

Occupational health and safety involve identifying workplace hazards, implementing protective equipment, and establishing administrative controls to prevent accidents. These questions cover mitigation measures, risk reduction, and safety best practices. This material is useful for RRB, SSC, and state-level technical or general awareness exams.

Workplace hazard controlsPersonal protective equipmentFire and ship safetyDisaster risk reductionAccident prevention

Occupational Health and Safety Questions

Multiple choice

What are some of the potential risks associated with parasailing?

  1. Drowning

  2. Equipment failure

  3. Injury from landing

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

All of the above are potential risks associated with parasailing.

Multiple choice

What are the requirements for work product protection?

  1. The work product must be prepared in anticipation of litigation.

  2. The work product must be prepared by an attorney or other legal professional.

  3. The work product must be confidential.

  4. All of the above.
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

In order to be protected by the work-product doctrine, the work product must be prepared in anticipation of litigation, by an attorney or other legal professional, and must be confidential.

Multiple choice

Which of the following is NOT a recommended safety measure for preventing falls in young children?

  1. Installing safety gates at the top and bottom of stairs

  2. Using non-slip mats in the bathroom

  3. Leaving toys and other objects on the floor

  4. Keeping windows and doors locked
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Leaving toys and other objects on the floor can create tripping hazards for young children. It is important to keep floors clear of clutter to prevent falls.

Multiple choice

Which of the following is NOT a recommended safety measure for preventing drowning in young children?

  1. Installing a pool fence with a self-closing gate

  2. Keeping pool toys out of the water when not in use

  3. Teaching children to swim at an early age

  4. Leaving young children unsupervised near water
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Leaving young children unsupervised near water is a major risk factor for drowning. Children should always be supervised by an adult when they are near water, even if they know how to swim.

Multiple choice

Which of the following is NOT a recommended safety measure for preventing poisoning in young children?

  1. Keeping all medications and household chemicals out of reach of children

  2. Using child-resistant packaging for medications and household chemicals

  3. Teaching children not to put anything in their mouths

  4. Leaving medications and household chemicals on the counter
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Leaving medications and household chemicals on the counter is a major risk factor for poisoning in young children. These items should always be kept out of reach of children, either in a locked cabinet or on a high shelf.

Multiple choice

Which of the following is NOT a recommended safety measure for preventing burns in young children?

  1. Keeping hot liquids and appliances out of reach of children

  2. Using outlet covers to prevent children from sticking their fingers in electrical sockets

  3. Teaching children not to touch hot surfaces

  4. Leaving hot food and drinks unattended
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Leaving hot food and drinks unattended is a major risk factor for burns in young children. Hot food and drinks should always be kept out of reach of children, either on a high shelf or in a locked cabinet.

Multiple choice

Which of the following is NOT a recommended safety measure for preventing falls from windows?

  1. Installing window guards or safety screens

  2. Keeping windows closed when children are in the room

  3. Teaching children not to climb on windowsills

  4. Leaving windows open for ventilation
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Leaving windows open for ventilation is a major risk factor for falls from windows. Windows should always be kept closed when children are in the room, or they should be installed with window guards or safety screens.

Multiple choice

Which of the following is NOT a recommended safety measure for preventing choking in young children?

  1. Cutting food into small pieces

  2. Avoiding giving children hard or round foods

  3. Teaching children to chew their food thoroughly

  4. Leaving small objects within reach of children
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Leaving small objects within reach of children is a major risk factor for choking. Small objects should always be kept out of reach of children, either in a locked cabinet or on a high shelf.

Multiple choice

Which of the following is NOT a recommended safety measure for preventing electrical shocks in young children?

  1. Using outlet covers to prevent children from sticking their fingers in electrical sockets

  2. Keeping electrical cords out of reach of children

  3. Teaching children not to touch electrical appliances

  4. Leaving electrical appliances plugged in and turned on
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Leaving electrical appliances plugged in and turned on is a major risk factor for electrical shocks in young children. Electrical appliances should always be unplugged and turned off when they are not in use.

Multiple choice

Which of the following is NOT a recommended safety measure for preventing falls in young children?

  1. Installing safety gates at the top and bottom of stairs

  2. Using non-slip mats in the bathroom

  3. Leaving toys and other objects on the floor

  4. Keeping windows and doors locked
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Leaving toys and other objects on the floor can create tripping hazards for young children. It is important to keep floors clear of clutter to prevent falls.

Multiple choice

What is the primary responsibility of an employer in ensuring workplace safety?

  1. Providing personal protective equipment (PPE)

  2. Conducting regular safety inspections

  3. Establishing and enforcing safety rules and procedures

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

An employer's primary responsibility is to ensure the safety of their employees, which involves providing PPE, conducting safety inspections, and establishing and enforcing safety rules and procedures.

Multiple choice

Which of the following is NOT a common type of hazard in a manufacturing environment?

  1. Electrical hazards

  2. Chemical hazards

  3. Biological hazards

  4. Ergonomic hazards
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Biological hazards are not typically found in manufacturing environments, unlike electrical, chemical, and ergonomic hazards.

Multiple choice

Which of the following is NOT a common type of personal protective equipment (PPE) used in manufacturing?

  1. Safety glasses

  2. Hard hat

  3. Safety shoes

  4. Lab coat
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Lab coats are not typically considered PPE in a manufacturing environment, unlike safety glasses, hard hats, and safety shoes.

Multiple choice

What is the recommended frequency for conducting safety inspections in a manufacturing facility?

  1. Monthly

  2. Quarterly

  3. Annually

  4. As needed
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

Safety inspections should be conducted monthly to identify and address potential hazards promptly.

Multiple choice

Which of the following is NOT a common cause of accidents in manufacturing?

  1. Slips, trips, and falls

  2. Caught-in or between machinery

  3. Exposure to hazardous substances

  4. Ergonomic stressors
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Ergonomic stressors are not typically a direct cause of accidents, but they can contribute to fatigue and discomfort, which may increase the risk of accidents.