General Awareness ยท Environmental Studies

Occupational Health and Safety

2,242 Questions

Occupational health and safety involve identifying workplace hazards, implementing protective equipment, and establishing administrative controls to prevent accidents. These questions cover mitigation measures, risk reduction, and safety best practices. This material is useful for RRB, SSC, and state-level technical or general awareness exams.

Workplace hazard controlsPersonal protective equipmentFire and ship safetyDisaster risk reductionAccident prevention

Occupational Health and Safety Questions

Multiple choice

What should be the primary focus of safety education in schools?

  1. Teaching students about specific safety hazards

  2. Developing students' critical thinking and problem-solving skills

  3. Promoting a culture of safety awareness and responsibility

  4. Enforcing strict safety rules and regulations
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Safety education should focus on fostering a culture of safety awareness and responsibility among students, rather than simply teaching them about specific hazards.

Multiple choice

Which of the following is NOT a recommended practice for preventing slips, trips, and falls in schools?

  1. Keeping floors clean and dry

  2. Using non-slip mats and rugs

  3. Installing handrails on stairs

  4. Encouraging students to run in the hallways
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Encouraging students to run in the hallways increases the risk of slips, trips, and falls.

Multiple choice

Which of the following is NOT a recommended practice for promoting a culture of safety awareness and responsibility among students?

  1. Encouraging students to report safety concerns

  2. Providing opportunities for students to participate in safety drills and training

  3. Displaying safety posters and signs in classrooms and hallways

  4. Punishing students for violating safety rules
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Punishing students for violating safety rules may create a culture of fear and resentment, rather than promoting a positive attitude towards safety.

Multiple choice

What is the recommended procedure for reporting a safety concern in a school?

  1. Contacting the school principal or administrator directly

  2. Submitting a written report to the school safety committee

  3. Posting the concern on social media

  4. Ignoring the concern and hoping it will go away
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

The recommended procedure for reporting a safety concern in a school is to contact the school principal or administrator directly.

Multiple choice

Which of the following is NOT a common type of safety hazard in school laboratories?

  1. Chemical spills

  2. Fire hazards

  3. Electrical hazards

  4. Biological hazards
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Biological hazards are not typically considered a common type of safety hazard in school laboratories.

Multiple choice

Which of the following is NOT a recommended practice for preventing electrical hazards in schools?

  1. Using properly grounded electrical outlets and appliances

  2. Inspecting electrical cords and equipment for damage regularly

  3. Overloading electrical outlets and circuits

  4. Keeping electrical appliances away from water sources
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Overloading electrical outlets and circuits is not a recommended practice for preventing electrical hazards in schools.

Multiple choice

Which of the following is NOT a type of risk in systems engineering?

  1. Technical risk

  2. Schedule risk

  3. Cost risk

  4. Political risk
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Political risk is not a type of risk in systems engineering. It is a type of risk that is associated with the political environment in which the system is being developed or operated.

Multiple choice

Which of the following is NOT a technique for managing risk in systems engineering?

  1. Risk identification

  2. Risk assessment

  3. Risk mitigation

  4. Risk acceptance
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Risk acceptance is not a technique for managing risk in systems engineering. It is a decision to accept a risk and not take any action to mitigate it.

Multiple choice

Which of the following is NOT a common type of fall protection system used in construction?

  1. Guardrails

  2. Safety nets

  3. Ladders

  4. Personal fall arrest systems
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

Ladders are not typically considered a fall protection system, as they do not provide a secure means of preventing falls from heights.

Multiple choice

Which of the following is NOT a common type of hazard associated with construction work?

  1. Falls from heights

  2. Electrical hazards

  3. Exposure to hazardous chemicals

  4. Heat stress
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Heat stress is not typically considered a hazard specifically associated with construction work, although it can be a concern in certain environments.

Multiple choice

Which of the following is NOT a common type of safety sign used in construction?

  1. Danger signs

  2. Warning signs

  3. Caution signs

  4. Informational signs
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Informational signs are not typically used in construction, as they are intended to provide general information rather than warnings or instructions.

Multiple choice

Which of the following is NOT a common type of injury that can occur in construction?

  1. Cuts and lacerations

  2. Bruises and contusions

  3. Fractures and dislocations

  4. Heat stroke
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Heat stroke is not typically considered a common type of injury specifically associated with construction work, although it can be a concern in certain environments.

Multiple choice

Which of the following is NOT a common type of hazard that can be identified during a JSA?

  1. Fall hazards

  2. Electrical hazards

  3. Chemical hazards

  4. Ergonomic hazards
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Ergonomic hazards are not typically considered a common type of hazard that is specifically identified during a JSA, although they can be a concern in certain tasks.

Multiple choice

Which of the following is NOT a common topic covered in a toolbox talk?

  1. Fall protection

  2. Electrical safety

  3. Chemical safety

  4. Time management
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Time management is not typically considered a common topic covered in a toolbox talk, as it is not directly related to safety.

Multiple choice

How can animation and VFX be used to improve the safety of Indian manufacturing facilities?

  1. By creating realistic simulations of work processes and procedures

  2. By identifying and correcting potential hazards in the workplace

  3. By providing training and simulation solutions for employees

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Animation and VFX can be used to improve the safety of Indian manufacturing facilities by creating realistic simulations of work processes and procedures, identifying and correcting potential hazards in the workplace, and providing training and simulation solutions for employees.