General Awareness ยท Environmental Studies

Occupational Health and Safety

1,986 Questions

Occupational health and safety involve identifying workplace hazards, implementing protective equipment, and establishing administrative controls to prevent accidents. These questions cover mitigation measures, risk reduction, and safety best practices. This material is useful for RRB, SSC, and state-level technical or general awareness exams.

Workplace hazard controlsPersonal protective equipmentFire and ship safetyDisaster risk reductionAccident prevention

Occupational Health and Safety Questions

Multiple choice

Which of the following is not a common safety procedure in manufacturing industries?

  1. Wearing appropriate personal protective equipment (PPE)

  2. Following lockout/tagout procedures when servicing machinery

  3. Using proper lifting techniques

  4. Taking regular breaks to prevent fatigue
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

While wearing appropriate PPE, following lockout/tagout procedures, and using proper lifting techniques are all common safety procedures, taking regular breaks to prevent fatigue is not typically considered a specific safety procedure in manufacturing industries.

Multiple choice

What is the primary responsibility of a safety officer in a manufacturing facility?

  1. Enforcing safety regulations

  2. Conducting safety audits

  3. Providing safety training to employees

  4. Investigating accidents and incidents
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

The primary responsibility of a safety officer in a manufacturing facility is to enforce safety regulations and ensure compliance with established safety standards.

Multiple choice

Which of the following is not a common type of safety training provided to employees in manufacturing industries?

  1. Fire safety training

  2. First aid training

  3. Machine operation training

  4. Cybersecurity awareness training
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

While fire safety training, first aid training, and machine operation training are commonly provided in manufacturing industries, cybersecurity awareness training is not typically a focus area for safety training programs.

Multiple choice

What is the purpose of a safety committee in a manufacturing facility?

  1. To review and update safety policies and procedures

  2. To conduct regular safety inspections

  3. To investigate accidents and incidents

  4. To provide safety training to employees
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

The primary purpose of a safety committee in a manufacturing facility is to review and update safety policies and procedures to ensure they are effective and compliant with regulations.

Multiple choice

Which of the following is not a common type of personal protective equipment (PPE) used in manufacturing industries?

  1. Safety glasses

  2. Hard hats

  3. Safety shoes

  4. Lab coats
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

While safety glasses, hard hats, and safety shoes are commonly used PPE in manufacturing industries, lab coats are typically associated with laboratory settings and not manufacturing operations.

Multiple choice

Which of the following is not a common type of hazard control measure used in manufacturing industries?

  1. Engineering controls

  2. Administrative controls

  3. Personal protective equipment (PPE)

  4. Cybersecurity measures
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

While engineering controls, administrative controls, and personal protective equipment (PPE) are common hazard control measures in manufacturing industries, cybersecurity measures are typically not directly related to manufacturing safety and health regulations.

Multiple choice

What is the role of the Consumer Product Safety Commission (CPSC) in product liability law?

  1. To investigate product safety hazards

  2. To recall defective products

  3. To set product safety standards

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

The Consumer Product Safety Commission (CPSC) is responsible for investigating product safety hazards, recalling defective products, and setting product safety standards. The CPSC also works to educate consumers about product safety.

Multiple choice

What is the most important factor to consider when choosing a dust collection system?

  1. The size of the workshop

  2. The type of woodworking tools used

  3. The amount of dust and debris generated

  4. The budget available
Reveal answer Fill a bubble to check yourself
C Correct answer
Explanation

The amount of dust and debris generated by the woodworking tools is the most important factor to consider when choosing a dust collection system, as it determines the size and capacity of the system required.

Multiple choice

What are some of the safety precautions that should be taken when using a dust collection system?

  1. Wear a dust mask

  2. Keep the dust collector away from flammable materials

  3. Ensure that the ductwork is properly sealed

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

All of the mentioned safety precautions should be taken when using a dust collection system to ensure the safety of the woodworker and prevent accidents.

Multiple choice

What should you always have in your car in case of a weather emergency?

  1. A first aid kit

  2. A flashlight

  3. A blanket

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

It is important to always have a first aid kit, a flashlight, and a blanket in your car in case of a weather emergency.

Multiple choice

Which of the following is NOT a common type of safety hazard in schools?

  1. Slips, trips, and falls

  2. Fire hazards

  3. Chemical spills

  4. Cyberbullying
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Cyberbullying is not a physical safety hazard commonly encountered in schools.

Multiple choice

Which of the following is NOT a recommended practice for preventing slips, trips, and falls in schools?

  1. Keeping floors clean and dry

  2. Using non-slip mats and rugs

  3. Installing handrails on stairs

  4. Encouraging students to run in the hallways
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Encouraging students to run in the hallways increases the risk of slips, trips, and falls.

Multiple choice

Which of the following is NOT a recommended practice for promoting a culture of safety awareness and responsibility among students?

  1. Encouraging students to report safety concerns

  2. Providing opportunities for students to participate in safety drills and training

  3. Displaying safety posters and signs in classrooms and hallways

  4. Punishing students for violating safety rules
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Punishing students for violating safety rules may create a culture of fear and resentment, rather than promoting a positive attitude towards safety.

Multiple choice

What is the recommended procedure for reporting a safety concern in a school?

  1. Contacting the school principal or administrator directly

  2. Submitting a written report to the school safety committee

  3. Posting the concern on social media

  4. Ignoring the concern and hoping it will go away
Reveal answer Fill a bubble to check yourself
A Correct answer
Explanation

The recommended procedure for reporting a safety concern in a school is to contact the school principal or administrator directly.

Multiple choice

Which of the following is NOT a common type of safety hazard in school laboratories?

  1. Chemical spills

  2. Fire hazards

  3. Electrical hazards

  4. Biological hazards
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Biological hazards are not typically considered a common type of safety hazard in school laboratories.