General Awareness ยท Environmental Studies

Occupational Health and Safety

1,986 Questions

Occupational health and safety involve identifying workplace hazards, implementing protective equipment, and establishing administrative controls to prevent accidents. These questions cover mitigation measures, risk reduction, and safety best practices. This material is useful for RRB, SSC, and state-level technical or general awareness exams.

Workplace hazard controlsPersonal protective equipmentFire and ship safetyDisaster risk reductionAccident prevention

Occupational Health and Safety Questions

Multiple choice

Which of the following is a common cybersecurity risk mitigation strategy?

  1. Implementing security controls

  2. Educating employees about cybersecurity risks and best practices.

  3. Conducting regular security audits and assessments.

  4. All of the above.
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Implementing security controls, educating employees about cybersecurity risks and best practices, and conducting regular security audits and assessments are all common cybersecurity risk mitigation strategies.

Multiple choice

Which of the following is NOT a common type of personal protective equipment (PPE) used in construction sites?

  1. Hard hat

  2. Safety glasses

  3. Steel-toed boots

  4. Lab coat
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

A lab coat is not typically used as PPE in construction sites. It is more commonly used in laboratory settings.

Multiple choice

Which of the following is a common cause of electrical accidents in the workplace?

  1. Overloaded circuits

  2. Damaged insulation

  3. Improper grounding

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

All of the options mentioned are common causes of electrical accidents in the workplace.

Multiple choice

Which of the following is NOT a common type of hazard warning sign?

  1. Danger

  2. Warning

  3. Caution

  4. Notice
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Notice signs are not typically used as hazard warning signs.

Multiple choice

Which of the following is NOT a common type of personal protective equipment (PPE) used in healthcare settings?

  1. Gloves

  2. Masks

  3. Goggles

  4. Hard hat
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Hard hats are not typically used as PPE in healthcare settings.

Multiple choice

What is the maximum allowable concentration of carbon monoxide (CO) in the air in a workplace, according to OSHA regulations?

  1. 50 parts per million (ppm)

  2. 100 ppm

  3. 200 ppm

  4. 300 ppm
Reveal answer Fill a bubble to check yourself
Correct answer
Explanation

The PEL for CO in a workplace is 50 ppm, as specified by OSHA regulations.

Multiple choice

Which of the following is NOT a common type of hazard communication standard?

  1. Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

  2. Occupational Safety and Health Administration (OSHA) Hazard Communication Standard

  3. National Fire Protection Association (NFPA) 704

  4. American National Standards Institute (ANSI) Z400.1
Reveal answer Fill a bubble to check yourself
Correct answer
Explanation

NFPA 704 is a fire safety standard, not a hazard communication standard.

Multiple choice

Which of the following is NOT a common type of hazard assessment tool?

  1. Job hazard analysis (JHA)

  2. Risk assessment matrix

  3. Safety audit

  4. Incident investigation report
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Incident investigation reports are not typically used as hazard assessment tools.

Multiple choice

What is the recommended frequency for conducting safety training for employees?

  1. Annually

  2. Every two years

  3. Every three years

  4. As needed
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Safety training should be conducted as needed, based on the specific hazards and risks in the workplace.

Multiple choice

Which of the following is a common preventive measure for eye injuries in children?

  1. Wearing protective eyewear during sports and activities

  2. Avoiding sharp objects and hazardous materials

  3. Regular eye exams

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

Preventive measures for eye injuries in children include wearing protective eyewear during sports and activities, avoiding sharp objects and hazardous materials, and having regular eye exams.

Multiple choice

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) uses a system of hazard pictograms to communicate the hazards of chemicals. How many hazard pictograms are there in the GHS?

  1. 6

  2. 9

  3. 12

  4. 15
Reveal answer Fill a bubble to check yourself
B Correct answer
Explanation

The GHS uses a system of nine hazard pictograms to communicate the hazards of chemicals.

Multiple choice

Which of the following is NOT a type of hazard pictogram used in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)?

  1. Flame

  2. Exclamation mark

  3. Skull and crossbones

  4. Tree
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

The GHS uses nine hazard pictograms, including flame, exclamation mark, skull and crossbones, and various others. There is no pictogram representing a tree in the GHS.

Multiple choice

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) includes a set of standard signal words to indicate the severity of the hazard. Which of the following is NOT a standard signal word used in the GHS?

  1. Danger

  2. Warning

  3. Caution

  4. Notice
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

The GHS uses three standard signal words: Danger, Warning, and Caution. The term 'Notice' is not a standard signal word in the GHS.

Multiple choice

Which of the following is NOT a key component of a business continuity plan?

  1. Identification of critical business functions

  2. Development of recovery strategies

  3. Testing and exercising the plan

  4. Training employees on the plan
Reveal answer Fill a bubble to check yourself
B Correct answer
Explanation

Development of recovery strategies is not a key component of a business continuity plan. It is a component of an incident response plan.

Multiple choice

What is the best way to prevent a cybersecurity incident?

  1. Implement strong security controls

  2. Educate employees about cybersecurity risks

  3. Have a cybersecurity incident response plan in place

  4. All of the above
Reveal answer Fill a bubble to check yourself
D Correct answer
Explanation

The best way to prevent a cybersecurity incident is to implement strong security controls, educate employees about cybersecurity risks, and have a cybersecurity incident response plan in place.