Home › Quizzes › CCNA Boot Camp CCNAX

CCNA Boot Camp CCNAX

This Test is based on the CCNA Boot Camp certification exams, which is equally important for the CS and GATE aspirants.

20 Questions Published
Play Quiz Practise this topic out loud

Questions

Question 1 Multiple Choice (Single Answer)

Which of the following is/are correct statement(s) about Virtual Local Area Networks (VLANs)?

  1. VLANs are used for different LANs to communicate with them effectively.
  2. A VLAN cannot extend beyond its physical boundary across a WAN.
  3. VLANs provide improved performance as compared to LAN.
  4. All of the above
  5. Both (1) and (3)
Question 2 Multiple Choice (Single Answer)

Which of the following is/are incorrect statement(s) for the CCNA routing protocols?

  1. The routing protocols are responsible for the communication among networking devices.
  2. Interior Gateway Routing Protocol (IGRP) is used to route information packets over the Internet.
  3. Interior Gateway Routing Protocol (IGRP) is used for communication of the networking mediums.
  4. All of the above
  5. Both (1) and (3)
Question 3 Multiple Choice (Single Answer)

Which of the following is/are incorrect statement(s) about multicast communication in CCNA routing?

  1. In multicast communication, the sender transmits only one copy of data and it is processed to many devices.
  2. There must be only one sender and one receiver in multicast communication.
  3. Downloading a file from a FTP server is an example of multicast communication.
  4. Both (1) and (2)
  5. Both (2) and (3)
Question 4 Multiple Choice (Single Answer)

Which of the following is/are correct statements about Interior Gateway Routing Protocol (IGRP) in CCNA routing?

  1. It is a distance vector routing protocol.
  2. IGRP protocol is suitable in case of large networks.
  3. IGRP supports multiple paths.
  4. All of the above
  5. Both (1) and (3)
Question 5 Multiple Choice (Single Answer)

Which of the following is/are correct about RIP v2 (Routing Information Protocol version 2) in CCNA routing?

  1. It is based on multicast updates.
  2. It supports triggered updates.
  3. It supports variable-length subnet masking (VLSM).
  4. It provides user authentication.
  5. All of the above
Question 6 Multiple Choice (Single Answer)

Which of the following is/are true about Backbone router in OSPF (Open Shortest Path First) Protocol?

  1. It includes all area border routers and also routers connecting to different areas.
  2. It has only OSPF neighbour relationships with routers in the same area.
  3. It connects one or more OSPF areas to the main backbone network.
  4. It is an interface elected among all routers on a network segment.
  5. All of the above
Question 7 Multiple Choice (Single Answer)

Which of the following is/are false statement(s) for Routing Information Protocol (RIP) in CCNA routing?

  1. RIP is called distance-vector routing protocol.
  2. RIP uses the criteria like the link's speed, delay, packet size, loading and reliability to determine the best path.
  3. The time to converge and scalability are poor in RIP protocols.
  4. In RIP, the maximum allowable number of hops a packet can traverse in an IP network implementing RIP is 15 hops.
  5. Both (2) and (4)
Question 8 Multiple Choice (Single Answer)

What are the benefits of Cisco Three-Layer hierarchical model?

  1. It provides better management and troubleshooting.
  2. It provides better scalability.
  3. It provides better redundancy.
  4. All of the above
  5. Both (2) and (3)
Question 9 Multiple Choice (Single Answer)

Which of the following is/are the correct statement(s) about Open Shortest Path First (OSPF) Protocol?

  1. OSPF protocol is a link state protocol.
  2. Open Shortest Path First (OSPF) is a classless protocol.
  3. It requires more memory.
  4. Every router in an OSPF network needs a unique OSPF router id.
  5. All of the above
Question 10 Multiple Choice (Single Answer)

Which of the following is/are false statement(s) about link state routing protocol in CCNA routing?

  1. This protocol used in the packet switching networks for computer communications.
  2. Link state routing protocol uses the Bellman–Ford algorithm.
  3. Link state routing protocols have less computational complexity and message overhead.
  4. All of the above
  5. Both (2) and (3)
Question 11 Multiple Choice (Single Answer)

Which of the following is/are true about Area Border Router (ABR) in OSPF (Open Shortest Path First) Protocol?

  1. It includes all area border routers and also routers connecting different areas.
  2. It has only OSPF neighbour relationships with routers in the same area.
  3. It connects one or more OSPF areas to the main backbone network.
  4. It is an interface elected among all routers on a network segment.
  5. All of the above
Question 12 Multiple Choice (Single Answer)

Which of the following is/are true about Internal Router in OSPF (Open Shortest Path First) Protocol?

  1. It includes all area border routers and also routers connecting different areas.
  2. It has only OSPF neighbour relationships with routers in the same area.
  3. It connects one or more OSPF areas to the main backbone network.
  4. It is an interface elected among all routers on a network segment.
  5. Both (3) and (4)
Question 13 Multiple Choice (Single Answer)

What are the functionalities of a network hub?

  1. Hubs are the network infrastructure devices used for Local Area Network (LAN).
  2. In a hub, if the two network devices on the same network try to send packets at the same time, then a collision is possible.
  3. Hubs segment large networks into logical segments called subnets.
  4. All of the above
  5. Both (1) and (2)
Question 14 Multiple Choice (Single Answer)

Which of the following is/are false statements about a network switch?

  1. Each port of a network switch has a separate collision domain.
  2. A network switch has only a few ports and connects with only a few collision domains or hosts.
  3. A bridge has comparatively less ports than a network switch.
  4. The network switches operate at the data link layer of the OSI model.
  5. Both (1) and (2)
Question 15 Multiple Choice (Single Answer)

What are the advantages of using VLANs (Virtual Local Area Networks)?

  1. They provide ease of network maintenance.
  2. They reduce the cost.
  3. VLANs provide better security as compared to LANs.
  4. VLANs provide improved performance as compared to LANs.
  5. All of the above
Question 16 Multiple Choice (Single Answer)

Which of the following is called Wildcard Mask in Open Shortest Path First (OSPF) Protocol Configuration?

  1. It is a unique number on this router that groups a series of OSPF configuration commands under a specific running process.
  2. It is a mask of bits that indicates the availability of the IP address for the particular network.
  3. It gives the routing updates to OSPF protocol.
  4. It determines the size of a network or subnet for some routing protocols.
  5. Both (2) and (4)
Question 17 Multiple Choice (Single Answer)

What is the work of IEEE 802.10 Protocol while communicating with VLANs?

  1. This protocol is used to interconnect two VLAN-capable Ethernet.
  2. The protocol provides authenticity or integrity to the data.
  3. This protocol interconnects multiple switches and routers.
  4. This protocol does not provide any connectivity for the VLANs.
  5. Both (2) and (3)
Question 18 Multiple Choice (Single Answer)

What is the work of Inter-Switch Link Protocol (ISL) with communicating VLANs?

  1. This protocol is used to interconnect two VLAN-capable Ethernets.
  2. The protocol provides authentication and encryption techniques to ensure data confidentiality and integrity.
  3. This protocol interconnects multiple switches and routers.
  4. This protocol does not provide any connectivity for the VLANs.
  5. None of the above
Question 19 Multiple Choice (Single Answer)

What is the work of IEEE 802.1Q Protocol while communicating with VLANs?

  1. This protocol is used to interconnect two VLAN-capable Ethernet.
  2. The protocol provides authenticity or integrity to the data.
  3. This protocol interconnects multiple switches and routers.
  4. All of the above
  5. Both (2) and (3)
Question 20 Multiple Choice (Single Answer)

What is the work of ATM LANE Emulation Protocol (LANE) while communicating with VLANs?

  1. This protocol is used to interconnect two VLAN-capable Ethernet.
  2. The protocol provides authenticity or integrity to the data.
  3. This protocol interconnects multiple switches and routers.
  4. By using LANE protocol, applications can use normal LAN functions without the underlying complexities of the ATM implementation.
  5. Both (2) and (3)
← Back to Quizzes