0

Data Warehouse Storage Online Quiz

Description: Data Warehouse Storage Online Quiz
Number of Questions: 31
Created by:
Tags: storage
Attempted 0/27 Correct 0 Score 0

What is NDMP?

  1. Network Data Method Protection

  2. Network Data Management Protocol

  3. Network Disaster Mitigation Procedure

  4. Network Data Management Privacy


Correct Option: B

Full form of SAN?

  1. Storage Attached Network

  2. Stoarge Area Network

  3. Storage Addes Network

  4. Storage Adapter Network


Correct Option: B

How many disks are present in a single enclosure of a CLARiiON array?

  1. 16

  2. 8

  3. 32

  4. 15


Correct Option: D

How many storage processors are present in the CLARiiON?

  1. 1

  2. 2

  3. 4

  4. 0


Correct Option: B

We can connect a CLARiiON through iSCSI or FC network. (True/False)

  1. True

  2. False


Correct Option: A

Maximum number of disks that can be supported by a CLARiiON CX4-960

  1. 480

  2. 960

  3. 120

  4. 15


Correct Option: B
  1. Block

  2. Frame

  3. Cylinder

  4. File


Correct Option: B
Explanation:

To solve this question, the user needs to have an understanding of the basic components and terminology used in Fibre Channel (FC) networks.

In Fibre Channel, data is transferred in units called "frames." A frame is the smallest unit of information transfer in FC. It contains the data being transmitted as well as control information such as headers and CRC (Cyclic Redundancy Check) for error detection.

With this knowledge, let's evaluate each option:

A. Block: A block is a unit of data storage and is not the smallest unit of information transfer in FC. It refers to a set of data, typically a fixed size, that is read from or written to storage devices.

B. Frame: This option is correct. In Fibre Channel, a frame is the smallest unit of information transfer. It contains the data being transmitted along with control information.

C. Cylinder: A cylinder is a term used in disk storage and refers to a group of tracks that are located at the same radial distance from the center of the disk. It is not the smallest unit of information transfer in FC.

D. File: A file is a collection of data stored on a file system and is not the smallest unit of information transfer in FC.

Therefore, the correct answer is:

B. Frame

Which is the Tape storage

  1. Digital Linear Tape

  2. Advanced intelligent tape

  3. Linear Tape open

  4. All the above


Correct Option: D

What is the Default ID for SCSI HBA ?

  1. 3

  2. 5

  3. 7

  4. 1


Correct Option: C

AI Explanation

To answer this question, you need to understand the concept of the default ID for SCSI HBA (Host Bus Adapter).

The default ID for SCSI HBA is commonly set to 7. SCSI devices are connected to the SCSI bus, and each device on the bus is assigned a unique ID. The SCSI HBA is also a SCSI device, and it typically has an ID assigned to it as well.

The ID determines the priority of the device on the bus, with the lowest ID having the highest priority. The default ID for the SCSI HBA is often set to 7 because it is the highest possible ID value. This allows other SCSI devices with lower IDs to be given higher priority.

Therefore, the correct answer is:

C. 7

Name the features of SCSI 3 standard

  1. Quick arbitrartion and selection

  2. Doamin Validation

  3. Cyclic Redundancy and Check

  4. All the above


Correct Option: D

How many classes of service are available in Fibre Channel?

  1. 5 Classes

  2. 9 Classes

  3. 7 classes

  4. 3 Classes


Correct Option: D

What is true about spoofing ? a ) One of the class of attacks against SAN b) Allow access to or destruction of data c) Reduces availability d) Allow access to data

  1. a and b

  2. a and c

  3. c and d

  4. All the above


Correct Option: A

What is Hybrid Zones ?

  1. port – port traffic

  2. Access is controlled using WWN

  3. Contains ports and WWNs

  4. A collection of Zones


Correct Option: C

How many minimum drives are required to create R5 ( RAID 5) ?

  1. 3

  2. 5

  3. 2

  4. 4


Correct Option: A

AI Explanation

To answer this question, you need to understand the concept of RAID 5.

RAID 5 is a redundant array of independent disks that uses block-level striping with distributed parity. It requires a minimum of 3 drives to be created.

Let's go through each option to understand why it is correct or incorrect:

Option A) 3 - This option is correct because RAID 5 requires a minimum of 3 drives. It uses block-level striping with distributed parity, where the data and parity information are distributed across the drives.

Option B) 5 - This option is incorrect because RAID 5 does not require 5 drives. It only requires a minimum of 3 drives.

Option C) 2 - This option is incorrect because RAID 5 cannot be created with only 2 drives. It requires a minimum of 3 drives.

Option D) 4 - This option is incorrect because RAID 5 does not require 4 drives. It only requires a minimum of 3 drives.

The correct answer is Option A) 3. This option is correct because RAID 5 requires a minimum of 3 drives to be created.

What protocols used in physical/datalink and network layer of SAN?

  1. Ethernet

  2. SCSI

  3. FC

  4. All the above


Correct Option: D

What is true about Drive duplexing ?

  1. Two controllers used to write data and faster than disk mirroring

  2. Spread data between multiple drives

  3. The process of reading and writing data on two drives simultaneously

  4. Disk striping with parity


Correct Option: A

What is the function of layer FC-2 ?

  1. Physical layer

  2. encode/decode

  3. routing, flow control

  4. mapping interface


Correct Option: C

What is true about Drive duplexing

  1. Two controllers used to write data and faster than disk mirroring

  2. Spread data between multiple drives

  3. The process of reading and writing data on two drives simultaneously

  4. Disk striping with parity


Correct Option: A

8gb FC SLIC support (Glacier)

  1. To increase performance of CS

  2. To increase the performance of the DMs on the NS-960 and NS-G8

  3. Will provide a savings in DM slots used allowing for more flexibility

  4. None of the above


Correct Option: B

Celerra can support _____ TB file system.

  1. 4TB

  2. 8TB

  3. 16TB

  4. 32TB


Correct Option: C

Support tree quota limit up to a minimum of ____ Terabyte, ___ TB preferable for both block size and file size policy.

  1. 2, 4

  2. 4, 8

  3. 8,16

  4. 16, 32


Correct Option: D

Rebooting a Data Mover involves un-mounting and mounting filesystems that often consumes the majority of reboot time (more than three minutes), depending on the complexity of the configuration. A Data Mover reboot procedure that optimizes these two steps will reduce the overall reboot time including disruptions during upgrades (reboot) and recovery from fatal hardware and software events (failover or reboot for single DM).

  1. Fast Mount

  2. Slow Mount

  3. Mount

  4. All the Above


Correct Option: D

Replicator V1 shall support replication between DART ____ and ______.

  1. source 5.5, target 5.6

  2. source 5.6, taarget 6.0

  3. source 5.6.x.x , target 5.6.x.x

  4. souce 5.6, target 5.5


Correct Option: A

If a user locks a file without specifying a retention period.

  1. There is no lock system with retention period.

  2. Cannot be deleted, nor the retention period changes

  3. Can be deleted and the retention period can be changes

  4. None of the above


Correct Option: A

CMR10 supports Support for creating clones of files.

  1. Support creating both thin (files that share original blocks) and thick (files that are full copies of the source file) clones

  2. Support a minimum of 2000 clones

  3. Clones must be writeable

  4. All the above


Correct Option: D

Unused SavVol space

  1. can be reclaimed.

  2. cannot be reclaimed.

  3. Abort the sessions and resync.

  4. All the above


Correct Option: A,C

16GB memory per storage processor is allowed in

  1. CX4-120

  2. CX3-80

  3. CX4-960

  4. none


Correct Option: C
- Hide questions