Twenty degree full depth involute profiled 19-tooth pinion and 37-tooth gear are in mesh. If the module is 5 mm, the center distance between the gear pair will be
Reveal answer
Fill a bubble to check yourself
Keep practicing — related questions
- A 20؛ full depth involute spur pinion of 4 mm module and 21 teeth is to transmit 15 kW at 960 rpm. Its face...
- A 20؛ full depth involute spur pinion of 4 mm module and 21 teeth is to transmit 15 kW at 960 rpm. Its face...
- One tooth of gear having 4 module and 32 teeth is shown in the figure. Assume that the gear tooth and the c...
- The working depth of an involute gear is equal to
- 4. If a 20 teeth gear is meshes with 40 teeth gear then which is a weaker gear in bending if both the gears...
- A dielectric slab of thickness 4 mm is placed between the plates of a parallel plate condenser. When the di...
- What is the latency for a 5 MB message, if a bandwidth of the network is 1 Mbps. Assume that the distance b...
- Directions: Complete the following number series. 19, 9, 7, 3, 5, ?