In a single pass rolling process using 410 mm diameter steel rollers, a strip of width 140 mm and the thickness 8 mm undergoes 10% reduction of thickness. The angle of bite (in radians) is
Reveal answer
Fill a bubble to check yourself
Keep practicing — related questions
- In a single pass rolling operation, a 20 mm thick plate with plate width of 100 mm, is reduced to 18 mm. Th...
- A 4 mm thick sheet is rolled with 300 mm diameter rolls to reduce thickness without any change in its width...
- Directions: Carry Two Marks Each. Orthogonal turning of a mild steel tube with a tool of rake angle 10o is ...
- Manganese is mainly used in the steel industry and in the ferro-manganese alloy. It is also used in manufac...
- Which of the following processes cleans up temporary segments that are no longer in use and recovers termin...
- Which process would be controlled by decreased use of weedicides?
- Consider a conductor which passes 5 x 1016 electrons in 1 minute. Calculate the current flowing in the cond...
- If in a code PUNCTUAL can be written as 6, 7, 8, 9, 10, 7, 11, 12, how can ACTUAL be written in that code?