A hydraulic jump takes place in a triangular channel of vertex angle 90^o, as shown in figure. The discharge is 1 m³/s and the pre-jump depth is 0.5 m. What will be the post-jump? (Take g = 9.81 m/s²)

Keep practicing — related questions

• A triangular open channel has a vertex angle of 90o and carries flow at a critical depth of 0.30 m. The dis...
• The top width and the depth of flow in a triangular channel were measured as 4 m and 1 m, respectively. The...
• A spillway discharges flood flow at a rate of 9 m3/s per metre width. If the depth of flow on the horizonta...
• The height of a hydraulic jump in the stilling pool of 1.25 scale model was observed to be 10 cm. The corre...
• Water emerges from an ogee spillway with velocity = 13.72 m/s and depth = 0.3 m at its toe. The tail water ...
• Consider the following array definition int ia[] = { 0, 1, 2, 3, 4, 5 }; What is the equivalent of the foll...
• Consider the following statements: 1. Saw dust is a bad conductor of heat. 2. Water at 0o C feels colder th...
• A, B and C were partners sharing profits in the ratio 5 : 4 : 1. 'A' retired and new ratio was decided as 3...