A steel flat of rectangular section of size 70 mm ^_x 6 mm is connected to a gusset plate by three bolts each having a shear capacity of 15 kN in holes having diameter 11.5 mm. If the allowable tensile stress in the flat is 150 MPa, the maximum tension that can be applied to the flat is

Keep practicing — related questions

• Two plates are connected by fillet welds of size 10 mm and subjected o tension, as shown in the sketch. The...
• The maximum tensile stress at the section X-X shown in the figure below is ![](https://i.imgur.com/W8ySy9H....
• A truss tie consisting of 2 ISA 75 x 75 x 8 mm carries a pull of 150 kN. At ends the two angles are connect...
• A dielectric slab of thickness 4 mm is placed between the plates of a parallel plate condenser. When the di...
• switch(x) { default: System.out.println(Hello); } Which two are acceptable types for x? 1. byte 2. long 3. ...
• Which three are methods of the Object class? 1. notify(); 2. notifyAll(); 3. isInterrupted(); 4. synchroniz...
• Which three are valid method signatures in an interface? 1. private int getArea(); 2. public float getVol(f...
• A rectangular field measures 480 m x 144 m and is to be paved with square tiles. The owner wants the field ...